Skip to content

Heat Pumps in Alberta: Explore Your Rebates

Explore heat pump rebates in Alberta up to $10,000.

Check your rebate eligibility for free

View of Alberta

How much is the heat pump rebate in Alberta?

$2,000Households above the income limitStandard federal rebate
Most savings
$10,000Low- to median-income householdsAt or below Alberta’s limit: $50,816 for 1 person · $99,476 for 2 people
None verified yetAlberta heat pump rebatesOnly the federal rebate is verified here

Applications open through an online portal in early 2027. Eligible installations from November 1, 2026 can be claimed once it opens, under the rules in force on the installation date. No payments are made before launch and approval. The higher amount applies at or below the income limit for Alberta and your household size.

See the rebates for your address

Free signup. Compare quotes as providers respond. Entering an address does not apply for a rebate or request quotes.

Start with your address

From your address to heat pump quotes

Three steps to see what may apply to your home and compare quotes from vetted heat pump providers. Entering an address does not submit an application. Availability varies; Solenery does not install equipment or decide government eligibility.

  1. 1

    Enter your address

    Takes 30 seconds

  2. 2

    See your rebates

    Federal + provincial

  3. 3

    Compare free quotes

    From vetted local installers

Illustration of home upgrades including solar and a heat pump

Heat Pump Rebates in Alberta: Your Questions Answered

Answers checked against government and official program pages.

The upcoming National Heat Pump Rebate is $2,000, or up to $10,000 at or below the income limit for Alberta. In Alberta, the higher amount applies at or below these after-tax household incomes: $50,816 for 1 person, $99,476 for 2 people, $123,446 for 3 people, $145,019 for 4 people, $152,210 for 5+ people. We haven’t verified an open Alberta or Alberta heat pump rebate to add to it. The final federal amount depends on the cost of the equipment installed, and funding is only confirmed when an application is approved.

See the Alberta income limits

Canadian residents who own the home, including a property they rent out, and install an eligible system from November 1, 2026. A heat pump system on NRCan’s eligible product list (checked by AHRI number), able to heat the whole home, and bought from and installed by an HVAC contractor. One rebate per household, even if you own more than one property, and no previous federal heat-pump funding at the address. The higher amount depends on household after-tax income from your 2025 tax return; the program checks it with the CRA when you apply. Rules can still change, and provincial and utility programs have their own conditions. In Alberta, the higher amount applies at or below these after-tax household incomes: $50,816 for 1 person, $99,476 for 2 people, $123,446 for 3 people, $145,019 for 4 people, $152,210 for 5+ people.

See the Alberta income limits

Applications open through an online portal in early 2027. Eligible installations from November 1, 2026 can be claimed once it opens, under the rules in force on the installation date. No payments are made before launch and approval. Use Solenery now to explore program information, sign up free and compare heat-pump quotes as providers respond. For other rebates, check whether approval is required before work starts.

Use Solenery to prepare — sign up free

Solenery is a Canadian clean energy platform that connects property owners with the incentives that may apply to them and vetted providers. Enter your address and we match eligible incentives, then show your estimated net cost and payback so you can compare quotes side by side. Prefer to talk it through? The Solenery AI Advisor assesses your property and points you to the upgrades and programs worth exploring. Sign up free, confirm your property and choose your upgrades before requesting quotes; local availability varies. Solenery does not install equipment, submit your government application automatically or reserve rebate funding.

Use Solenery to prepare — sign up free

Only when each program’s rules allow it. We haven’t verified an open Alberta or Alberta heat pump offer to combine with the federal rebate. Eligible-cost limits, combined funding caps, exclusions and approval order determine what can be combined; program maxima cannot simply be added together. Confirm stacking with each administrator before budgeting.

Review program conditions

No. Program administrators decide eligibility and funding under their current rules. Confirm who submits each application—you or your provider—and obtain any required approval before work starts. Solenery does not award grants or reserve funding. Keep eligible model evidence, itemized invoices, receipts and approval references.

We have no fully verified heat pump loan terms to list for Alberta. Confirm current availability and terms directly before borrowing.

See financing

Calgary lists an electrical permit for an air-source heat pump; a mechanical permit may also be needed when existing ducts change or new ducts are installed. Have the quote identify both permit scopes and the inspection handover.

Calgary — clean energy improvement permits

Lethbridge Electric Utility publishes a residential electrical service upgrade process and handles residential service changes through Electric Design. Have the electrician establish whether the panel work also requires a utility-side service change.

Lethbridge — electric utility and service upgrades

No. These are potentially relevant offers, not an eligibility decision. Your primary heating fuel, electricity or gas account, income, building type, exact equipment and approval date can affect eligibility. A city may cross utility territories.

Request a room-by-room load calculation and model output at the local winter design temperature. Price ducts or indoor heads, backup controls, electrical work, permits and removal separately. Compare operating costs using your own utility rates.

Keep the federal rebate separate from confirmed project funding until it is approved. Applications open through an online portal in early 2027. Eligible installations from November 1, 2026 can be claimed once it opens, under the rules in force on the installation date. No payments are made before launch and approval. Final eligibility, equipment and stacking rules must be confirmed before including it in your budget; allow for the full installation cost if support is declined.

Request the same scope from each provider: matched model identifiers, winter capacity, backup, commissioning, electrical work, mounting and condensate management, plus labour, extras, permits, warranty, exclusions and who prepares rebate documents. Compare confirmed support separately from project cost and repayable loans.

Compare project options

See the rebates for your address

Free signup. Compare quotes as providers respond. Entering an address does not apply for a rebate or request quotes.

Start with your address

Planning a Heat Pump in Alberta

Alberta heat pump planning starts with winter capacity, backup controls and the electricity service. Municipal approvals and financing differ, so use the local guide before choosing an installation scope.

Plan Calgary permits around the ductwork

Calgary lists an electrical permit for an air-source heat pump; a mechanical permit may also be needed when existing ducts change or new ducts are installed.

Have the quote identify both permit scopes and the inspection handover.

Calgary — clean energy improvement permits · Checked

Use Lethbridge’s service-upgrade process

Lethbridge Electric Utility publishes a residential electrical service upgrade process and handles residential service changes through Electric Design.

Have the electrician establish whether the panel work also requires a utility-side service change.

Lethbridge — electric utility and service upgrades · Checked

Income limits for the up-to-$10,000 rebate in Alberta

Your household’s after-tax income must be equal to or less than the amount for Alberta and your household size. Households above it may be eligible for $2,000.

  1. Take line 23600 (net income) from your 2025 income tax return.
  2. Subtract line 43500 (total taxes payable).
  3. If you have a spouse or common-law partner, do the same for them and add the two results.
  4. Compare the total with the amount for your province or territory and household size. If it is equal to or less than that amount, you may qualify for the higher rebate.

Median after-tax household income in 2025 dollars (Statistics Canada 2021, adjusted for inflation). Columns are household size in people.

Median after-tax household income in 2025 dollars (Statistics Canada 2021, adjusted for inflation). Columns are household size in people.
Province12345+
Alberta$50,816$99,476$123,446$145,019$152,210

Source: ECCC program rules, published ; checked . Rules can still change.

See the rebates for your address

Free signup. Compare quotes as providers respond. Entering an address does not apply for a rebate or request quotes.

Start with your address

How much does a heat pump cost in Canada?

A federal estimate puts the average cost to buy and install a heat pump at $18,400. Here’s what that would cost if your rebate application is approved.

~$18,400Average installed costBefore any rebate
~$16,400After a $2,000 rebateIf approved for the standard amount
~$8,400After a $10,000 rebateIf approved for the full amount

You pay the installer the full price first. The rebate is paid after your application is approved, no earlier than the portal’s launch in early 2027. The full amount depends on household income and the cost of the equipment installed.

Sources: Government of Canada (average incl. panel work and sometimes oil tank removal, stated for the oil-to-heat-pump program in 2023) · BC Government (typical $8,000–$19,000). Your price depends on your home. Provincial rebates can lower it further.

What additional rebates may apply in Alberta?

These are potential pathways, not approval for every address. Check the named utility, municipality, audience, existing fuel, equipment and income requirements. Province guides include municipal offers only for the named city. Confirm approval timing and stacking rules with each administrator.

Local eligibility needs confirmation against the utility territory, municipal boundary and project details. Where no municipal offer is listed, we have not verified an additional municipal rebate for this location. Potential funding layers are separate; combination is subject to program rules.

0 open or closing programs · Local sources checked individually below · Upcoming offers excluded

Federal programs

National Heat Pump Rebate

A heat pump system on NRCan’s eligible product list (checked by AHRI number), able to heat the whole home, and bought from and installed by an HVAC contractor.

$2,000 for eligible households, or up to $10,000 for eligible households at or below the published after-tax income limit for their province or territory and household size. The final amount also depends on the cost of the equipment installed.

UpcomingApplications open through an online portal in early 2027. Eligible installations from November 1, 2026 can be claimed once it opens, under the rules in force on the installation date. No payments are made before launch and approval.

Closed to new applications. Approved oil-to-heat-pump projects may receive up to $10,000 under the direct federal stream.

ClosedDirect federal intake closed July 31, 2026. Final receipts due January 31, 2027. Provincial delivery has separate rules.

Source: each program's official page (linked) · as of Oct 23, 2026

What financing may be available in Alberta?

Loans must be repaid. Check property boundaries, utility account requirements, interest, fees and approval before beginning work.

We have no fully verified heat pump loan terms to list for this location. Local guidance above links to any researched municipal pathway; confirm current availability and terms directly before borrowing.

Compare heat-pump options

Quick answer

Start with the scope that suits your property, then compare written proposals using the same assumptions. These are project options, not a catalogue of available models or a promise of eligibility.

Compare suitability and ask the same questions of each provider. Final design requires a site assessment.
OptionWhen to consider itWhat to request
Ducted heat pumpWhole-home coverage where existing ducts can carry the required airflow.Ask for a room-by-room load calculation, duct assessment and matched indoor/outdoor model identifiers.
Ductless or multi-zoneHomes without suitable ducts, additions or rooms needing separate control.Compare head placement, room coverage, condensate drainage and performance when several zones run.
Cold-climate and backup strategyCompare winter capacity for either ducted or ductless systems; cold-climate is a performance category.Request capacity at local design temperature, backup controls, electrical work, outdoor clearances and noise details.

Before you hire: compare the full scope

Matched model identifiers, winter capacity, backup, commissioning, electrical work, mounting and condensate management. Ask each provider to itemize equipment or materials, labour, extras, permits, exclusions, warranty and responsibility for rebate documents. Confirm eligible equipment, pre-approval and stacking with the program administrator before signing.

Budget separately: project cost → confirmed grant support → remaining cost. Any borrowing is repayable, with its own interest, fees and approval. Unconfirmed rebates are not awarded savings.

Should You Choose Ducted or Ductless?

Quick answer

Existing usable ducts can make a central heat pump practical. A home without ducts may suit one or more ductless indoor heads. Neither layout is automatically best: the installer should calculate room loads and explain how heat and cooling will reach rooms with closed doors.

  • Ducted

    Check duct leakage, airflow, static pressure and the match between the indoor coil and outdoor unit. Reusing ducts does not mean they need no changes.
  • Ductless

    Discuss head locations, refrigerant line routes, condensate drainage and bedroom comfort. Several heads share the outdoor unit’s available capacity.
  • Replacement

    Recheck the load and product match when replacing an existing heat pump. The federal rebate excludes addresses that already received federal heat-pump funding; other programs may exclude replacements.

How Should the Installer Size Your Heat Pump?

Quick answer

Request a room-by-room load calculation using an appropriate Canadian design method such as CSA F280, followed by model selection at the local winter design condition. Floor area or the old furnace’s rating alone does not establish the heat pump size. Envelope improvements can change the load.

Ask for

  • The design temperature and calculated load
  • Equipment output and efficiency at that temperature
  • The airflow or indoor-head plan for each room

Avoid

  • A size chosen only from square footage
  • A cooling rating presented as proof of winter capacity
  • A promised saving without your rates and present heating use

Will a Heat Pump Cover the Coldest Days?

Quick answer

Cold-climate models can operate at lower outdoor temperatures than standard equipment, but operating temperature is not the same as full heating capacity. Compare the model’s output with the home’s load. The installer should explain the balance point, defrost behavior and whether electric or fuel-fired backup is needed.

  • Backup controls

    Agree which system runs at each temperature and what happens if the heat pump fails. Have controls commissioned and documented.
  • Snow and defrost

    Provide clearance from snow, a stable mount and a drainage route that avoids ice on paths. Follow the manufacturer’s clearances.
  • Running costs

    Use your electricity tariff, fuel price and equipment performance. A dual-fuel switch point depends on cost as well as capacity.

What Drives Installation Cost?

Quick answer

Equipment size, duct changes or indoor-head count, electrical work, outdoor mounting, permits and removal of old equipment all affect a quote. Ask for itemized scopes before comparing prices. A service load assessment determines whether a new circuit, load management, panel work or a utility service upgrade is needed.

Use an electrical assessment for the new heat pump and any planned EV charging. For oil conversions, include safe tank removal. Compare gross installation cost, confirmed rebates and financing cost separately.

What Should Be in a Heat Pump Quote?

Quick answer

A useful quote identifies the full indoor and outdoor model numbers, calculated load, low-temperature output, backup controls, electrical work, permits, commissioning and warranty. It also identifies the party obtaining rebate approval. Contractor participation in a rebate program and Solenery marketplace availability are separate checks.

Get it in writing

  • Equipment match and winter performance
  • Outdoor location, vibration isolation and drainage
  • Permits, inspections and any removal work
  • Commissioning results, owner training and service contact

Ready to upgrade? Sign up free and get heat-pump quotes.

Check your address and compare the design, installation scope and confirmed program conditions for your home.

Start with your address

Free signup. Compare quotes as providers respond. Entering an address does not apply for a rebate or request quotes.

Cutaway illustration of a home with a heat pump and solar panels

How We Research This Page

Last updated: .

Every rebate amount, status and deadline on this page was read on the program's official page and is dated next to it. Program amounts and deadlines change. Use each dated source and confirm current terms with the administrator before you apply.

Facts and figures come from government departments, utilities and safety regulators, linked next to each figure and listed here. We don't publish price ranges: costs depend on your home, so we explain what drives them and let contractors quote.

Solenery is a Canadian clean energy platform connecting property owners with incentives and vetted professionals. It doesn't install equipment, issue rebates or submit government applications itself.