
York HH8 and Affinity Heat Pump Review
A licensed brand now under Bosch that shares platforms with Coleman and Luxaire. What a Quebec...

What we could and could not confirm about the maker behind ACiQ’s direct-to-consumer heat pumps, and the warranty and installer questions to settle before ordering.
ACiQ is a private-label brand sold mainly online, not through a contractor
network, and nobody we could read confirms who manufactures its heat pumps.
The ACiQ split-system warranty hosted by the retailer HVACDirect says
installation must be in the United States, so a Canadian address may not be
covered. Treat any link to Carrier or Midea as unconfirmed, and settle
warranty and installer support before you order.
ACiQ is a private label, meaning a brand sold by a retailer or distributor that
does not say which factory builds it. ACiQ equipment is sold direct to consumers
through online retailers. The evidence on who is behind it is partial, and every
source that names a manufacturer hedges:
So the maker of ACiQ's inverter heat pumps and ductless units is unconfirmed. Do
not assume that parts, firmware or service are interchangeable with Carrier,
Bryant, Heil or Payne equipment. Ask the seller for the manufacturer, the AHRI
certificate and the full indoor and outdoor model numbers, and check the rating
plate once the unit is installed.
ACiQ's site, when we first checked it, showed single- and multi-zone ductless
mini-splits, floor, cassette and concealed-duct indoor units, and central split
systems. HVACDirect also sells packaged and dual-fuel ACiQ equipment. We could
not re-read either site on this update, so confirm what is currently offered.
ENERGY STAR's listing for the PGB548 packaged unit gives 16.0 SEER2 and R-454B
refrigerant.
We found no independent test of any ACiQ heat pump and no ACiQ cold-weather
figure we could re-verify. Seller-supplied operating ranges describe the lowest
outdoor temperature at which a unit runs, not how much heat it delivers there.
Ask for the capacity table at your design temperature for the exact pairing.
The ACiQ "High Efficiency Split Systems" limited warranty hosted by HVACDirect
states that installation must be in the United States. As we read it earlier, it
applies to the high-efficiency inverter splits and excludes the Essentials line,
the certificate lists an address in Vandalia, Ohio, and we did not read the
mini-split warranty, which may differ. The PDF now refuses automated downloads,
so we could not re-open it for this update; read the current version yourself
before relying on any of this.
If your equipment ships to a Canadian address, ask the seller in writing whether
the manufacturer will honour the warranty there, who pays for parts and labour,
and whether a licensed installer is required. A related brand sold by the same
retail trade, 1HVAC, has its own
warranty documents that you should compare rather than assume are identical.
Independent feedback is very thin. We found no ACiQ-specific threads or reviews
on HomeStars, RedFlagDeals, BBB or Reddit. PickHVAC, a US lead-generation site,
publishes an ACiQ review, but its page blocked us, so we did not use it.
Retailer-hosted ratings on HVACDirect are the seller's own and mostly US. ACiQ's
site has said mini-splits can be installed without special tools. That is a
seller claim, and refrigerant handling and warranty conditions can differ by
province, so ask a licensed contractor what they will and will not install.
Solenery does not set prices, and we could not re-verify any ACiQ retail price,
so none is quoted here. For context only, RenoQuotes, a commercial
renovation-quote site, says an installed central heat pump in Canada generally
costs $6,000 to $13,500 (updated July 31, 2026), with these size bands including
installation:
| Size | Approximate home area | Installed estimate |
|---|---|---|
| 2 ton (24,000 Btu) | 1,000 to 1,500 sq. ft. | $6,000 to $8,500 |
| 3 ton (36,000 Btu) | 1,500 to 2,000 sq. ft. | $8,000 to $10,500 |
| 4 ton (48,000 Btu) | 2,000 to 3,000 sq. ft. | $10,000 to $13,500 |
RenoQuotes adds that duct upgrades can add $1,500 to $3,000 or more, and that an
online equipment price rarely reflects the installed cost. A direct-to-consumer
kit price is therefore only one line of the bill: add shipping, installation,
electrical work and commissioning, and confirm whether a contractor will install
equipment they did not supply.
Use the
federal product-list guidance
to check the exact ACiQ model numbers before ordering, because eligibility
depends on the matched indoor and outdoor pairing. Compare the full installed
cost in Canadian dollars, with shipping and any separate installation charge
listed.
Explore heat-pump rebates you may qualify for through a property assessment.
Explore heat-pump rebates
A licensed brand now under Bosch that shares platforms with Coleman and Luxaire. What a Quebec...

A Whisperline heat pump is part of a building loop, so replacing one is a building decision....

A ground-source brand where the buried loop matters as much as the unit. What WaterFurnace...