Skip to content
Back to Heat Pumps
Outdoor heat pump beside a home with autumn landscaping.
Heat Pumps

WaterFurnace 5 and 7 Series Geothermal Review

A ground-source brand where the buried loop matters as much as the unit. What WaterFurnace rates, what Toronto monitoring found, and what geothermal costs.

Arshia Jahangiri
5 min

Table of contents

WaterFurnace sells ground-source (geothermal) heat pumps, a different decision from an air-source heat pump. Its US site rates the 7 Series at up to 5.2 COP and the 5 Series at up to 5.0, but a Toronto monitoring study found heating COPs of 2.4 to 3.5 across 10 systems. The loop design and installer matter at least as much as the unit, and we found no Canadian WaterFurnace owner data.

What you are buying

WaterFurnace sells units that exchange heat with buried pipe (a closed loop), a pond or a well instead of outdoor air. Its site lists the 7 Series 700A11, a variable-capacity all-in-one forced-air unit, and the 5 Series 500A11, a dual-capacity all-in-one in 1.5 to 6 ton sizes. The 5 Series family also includes split and hydronic units. The product pages we read are WaterFurnace's general site, which has a United States and Canada toggle, so confirm range availability with a Canadian dealer. WaterFurnace's current pages list R-454B literature.

The loop field, pumps and installation are bought separately from the heat pump unit. The Heating, Refrigeration and Air Conditioning Institute of Canada (HRAI) says the length of the underground loop and the ground conditions determine the system's heating and cooling capacity, so an undersized loop leaves the system running on backup heat more than it should.

Rated performance versus monitored

WaterFurnace lists the 7 Series 700A11 at up to 47.0 EER and 5.2 COP, with a variable-speed compressor, blower and loop pump, and the 5 Series 500A11 at up to 30.0 EER and 5.0 COP. These are vendor ratings at controlled test points, not what a home sees over a Canadian winter.

The best Canadian evidence is not brand-specific. The Toronto and Region Conservation Authority monitored 10 ground-source systems in the Greater Toronto Area, and The Atmospheric Fund's August 18, 2015 summary reports heating-season COPs of 2.4 to 3.5 and cooling-season COPs of 3.2 to 8.2, well above a gas furnace but below the headline ratings. We read the summary, not the underlying report, and it predates today's variable-speed models. A ground-source unit does not lose capacity to outdoor air temperature the way an air-source unit does, but a poorly sized loop can produce a similar result: higher bills and more electric backup.

Owner and installer reports

We found no Canadian WaterFurnace reviews. The two forum threads we read are old and American:

  • Fine Homebuilding (2005). An owner reported January heating bills higher than in his previous house, and the poster said a utility representative called his the highest geothermal house they had seen. The poster said the installer expected results to improve in the second year, and a trim supplier reported similar high bills from the same installer. It is one old, US account about installation and house tightness as much as equipment.
  • GreenBuildingAdvisor (2013). An owner reported problems with a river-loop system that included a WaterFurnace Super DeHeater plus third-party Multi-Aqua mini-splits and an air handler. The AC complaints concerned the mini-splits, not the WaterFurnace unit.

Neither is evidence of how current models behave. The manufacturer's reviews page shows two unattributed quotes, which are not independent.

Warranty: parts, plus a labour allowance

WaterFurnace's current product pages state that 7 Series and 5 Series units come with a 10-year warranty on all parts and a 5-year labour allowance for covered repairs, with an optional 10-year parts and 10-year labour allowance. Its warranty page says warranties cover parts, accessories and a labour allowance "for up to 5-10 years depending on the system", that your dealer's service contracts may affect the option you can select, and that you should register the unit to get a printable certificate. No registration deadline appears on the pages we read.

These are WaterFurnace's general-site terms. We could not confirm the Canadian certificate, so ask your dealer which option is in the bid, what the labour allowance pays per hour, and whether the loop installer separately warrants the buried pipe.

What it costs

Solenery does not set prices, and WaterFurnace publishes none. Geothermal bids are mostly loop work. The Get a Better Quote Ontario geothermal guide (updated July 23, 2026), a commercial site, anchors budgets with two public references:

Reference Amount
City of Toronto (modified March 6, 2026) up to $30,000 for a 3.5 to 4 ton single-home retrofit, excluding ductwork and electrical upgrades
A fuel dealer's 2024 price sheet (Orangeville) $29,314 to $46,485 for listed 3 to 4 ton closed-loop packages, excluding HST and electrical

The guide adds that a vertical loop adds about $3,000 per ton, confirmed on site, and says to ask who holds any required Ontario compliance approval for a deep vertical loop. These are loose anchors, not a survey. Ask each bidder to list exclusions: the loop type, drilling, ductwork, panel work and backup heat.

Rebates and the cost gap

Use the federal product-list guidance to verify the matched equipment. Eligibility depends on the exact unit combination, so match your quoted model numbers to the list before you assume anything.

Check your heat-pump rebate eligibility

Explore heat-pump rebates you may qualify for through a property assessment.

Explore heat-pump rebates

Who it suits

WaterFurnace suits a homeowner who is ready for a larger up-front project, has land or drilling access for a loop, and wants low running costs and a quiet outdoor presence. It is a poor fit if you need a low-cost swap. Do not compare it with air-source models as if they were interchangeable, and consider Viessmann if your home is hydronic and an air-to-water system is enough.

Questions to ask your installer

  1. Who designs and installs the loop, how was it sized for my heat load, and who warrants it?
  2. Which model is quoted, which warranty option is included, and what does the labour allowance pay?
  3. How much backup heat is installed, and when does it run?
  4. If the loop is vertical, who handles drilling approvals and what could change the price?

Sources

Share this article