Skip to content
Back to Heat Pumps
Outdoor heat pump unit beside a Canadian home
Heat Pumps

Bosch FHP Water-Source Heat Pump Review

A Bosch warranty library still lists “FHP Water Source Heat Pumps” under a common warranty with much shorter terms than the 10-year residential one. Here is the difference.

Arshia Jahangiri
6 min

Table of contents

FHP is the old Florida Heat Pump brand. A May 2011 Bosch release says Bosch acquired FHP in 2007 and rebranded its residential geothermal line under the Bosch name, with production staying in Fort Lauderdale. Bosch Canada's warranty library still has a "Bosch FHP Water Source Heat Pumps – Common Warranty" with short terms, separate from a 10-year residential water-source warranty. If you have an FHP-labelled unit, the series on the nameplate decides which document applies.

What you are buying

The Bosch release (PR Newswire, May 9, 2011) says FHP was acquired by Bosch in 2007, has made geothermal heat pumps since 1970, and would keep its Fort Lauderdale production facilities to make the entire Bosch geothermal line in the US. It announced the rebranding of "its FHP residential line" into the Bosch brand, in three product families called Geo 1000, 3000 and 6000, and promised a 10-year parts and labour warranty on the new line. That release is a US announcement and is 15 years old, so it tells you where the brand came from, not what Bosch sells in Canada today. We did not confirm whether FHP-labelled equipment is still sold, or whether it now mainly covers commercial units, so we claim neither.

Bosch Canada's current pages show a residential water-to-air heat pump category, with the RP series listed on a product page that describes an ENERGY STAR system with a 10-year warranty on the compressor and parts. A water-source or "FHP" unit can sit in two very different situations: a residential ground-source system with a buried loop, or a condo or apartment unit connected to a shared building water loop. The question to ask first is which one you have, because the loop owner, loop temperature and approvals differ. For sister pages on the same maker, see Bosch and Bosch geothermal.

Cold-weather and loop performance

Water-source performance depends on entering-water temperature and flow, not on outdoor air. In a building loop, the building operator sets the permitted loop temperatures. In a ground-source system, a poorly designed loop is the usual cause of weak winter heat. We found no FHP-specific rated capacity in the pages we read. Ask the installer for the heat pump's capacity at your entering-water temperature and flow, a loop test or design, and the pump requirements for the replacement.

What owners and installers report

We found no FHP-specific Canadian owner reports. We found BBB complaint listings for Bosch Thermotechnology, but they are US, unverified and not specific to FHP, so we do not use them. A geothermal cost page on an affiliate lead-generation site is not used as evidence either. Ask the installer for a recent replacement of the same model and how the cabinet, piping and flow center were handled.

Warranty: two documents with very different terms

Bosch Canada's warranty library lists several current documents. The two relevant ones are:

  • 10-year limited warranty, RF / BP / CE / RP / SM / TW series (effective January 2024): covers internal components for 10 years from the shorter of the certificate-of-occupancy date, certified start-up date or manufacture date, with repair or replacement of the defective part including labour at Bosch-approved rates under a warranty labour schedule. Other accessories carry 1 year.
  • "Bosch FHP Water Source Heat Pumps – Common Warranty" (November 2023), covering LV / SV / QV / WQ / EP / ES / LM / CA / EC / MC / WT / WW / RL / CL / CF / CP series: compressors for the shorter of 5 years from the certificate-of-occupancy date, 5 years from certified start-up or 6 years from manufacture, and other parts for the shorter of 1 year from installation or 18 months from manufacture. It excludes labour and complete unit replacement where the unit can be field-serviced, and the claim goes through the installing contractor and its distributor. The document says it applies to products used in the 50 US states, Canada, the District of Columbia and Puerto Rico.

So the 10-year headline on the RP product page applies to the RP family and not to a legacy unit covered by the common warranty. The library also lists a separate document for SV, WQ and RL units installed in Florida only. We did not find which document your unit uses, and we cannot map every legacy FHP model to a series, so ask Bosch Canada or the installer to match your nameplate to a document.

What it costs

We found no FHP-specific price. FurnacePrices.ca (a lead-generation site, updated October 9, 2026) puts geothermal heat pump systems at about $25,000 to $40,000 or more installed, driven largely by the buried loop. A like-for-like replacement into an existing loop or a building loop costs differently, so ask for an itemized quote that separates the heat pump, flow center, pump, piping and controls.

Rebates and the cost gap

For a residential project, check whether the ground-source equipment and any reused loop meet the program rules. Use the federal product-list guidance and ask for the replacement model number on the bid. If the unit serves a condo, the building manager decides who owns the loop and who approves the work.

Check your heat-pump rebate eligibility

Explore heat-pump rebates you may qualify for through a property assessment.

Explore heat-pump rebates

Who it suits

This page is mainly for owners and building managers with an existing FHP-labelled unit who need to match a replacement to the cabinet, piping and loop. If you are installing new, compare the current Bosch residential water-source models, not legacy FHP names.

Questions to ask your installer

  1. What is my FHP model and series, and is it a ground-loop or building-loop system?
  2. Which current Bosch replacement fits the cabinet, flow and airflow, and what are its capacities at my entering-water temperature?
  3. Which Canadian warranty document applies to my serial number, and who covers labour?
  4. Who owns the loop, and who approves the work?

Sources

Share this article