Skip to content
Back to Heat Pumps
Outdoor heat pump beside a home with autumn landscaping.
Heat Pumps

Friedrich Floating Air Heat Pump Review

A room-air-conditioner maker’s ductless line with a −22 °F single-zone rating. The hardest part is finding a Canadian installer who will service it.

Arshia Jahangiri
5 min

Table of contents

Friedrich's Floating Air line is a ductless range from a US company better known for room air conditioners. Friedrich rates Pro X single-zone units to −22 °F (about −30 °C) and multi-zone units to −13 °F (about −25 °C), but the only hands-on test we found was a US summer install. Its warranty terms differ between documents, and one reviewer found several HVAC companies would not install a unit they did not sell. Confirm local support first.

Three tiers, two cold ratings

Friedrich's Floating Air page lists the Pro X, Pro and Select tiers. Friedrich says Pro and Pro X systems are ENERGY STAR and ENERGY STAR Cold Climate certified and that only select Select models are ENERGY STAR certified. On heating, it says:

  • Pro X single-zone units function down to −22 °F (about −30 °C);
  • Pro and Pro X multi-zone units operate down to −13 °F (about −25 °C);
  • Pro X models keep 100% heating capacity at 5 °F (about −15 °C).

The gap matters. A whole-home multi-zone system is rated less cold than a single-zone one, and an operating limit does not say how much heat the unit delivers at that limit. Boldr, a Canadian smart-thermostat retailer, rates the Pro line at roughly −15 °C and the Select line as "standard to moderate cold", an opinion that conflicts with Friedrich's own Pro X figure. We could not read the NEEP database or a capacity chart, so ask for the extended capacity chart for the exact model at your design temperature.

What testing and owners say

  • Bob Vila (September 2024): the reviewer installed an 18,000 BTU Floating Air Pro bundle on a small commercial building in the US. They found it efficient and quiet, with its strongest fan speed at 48 decibels, comparable to a dishwasher in the background. The test was in summer at 80 °F outdoors, so it says nothing about sub-zero performance. The reviewer also reported that several HVAC companies would not install a unit they did not sell. The bundle sold for $1,899 (US dollars).
  • Install ease and support: the same reviewer wrote that they doubted you would find a mini-split that is as easy to install and performs as efficiently. Boldr, which sells smart thermostats, says Friedrich's systems perform reliably in standard residential and light-commercial applications, and that the main practical consideration is service-network availability, so confirm a Friedrich-capable contractor in your area before buying.
  • Friedrich's claim: the wall-mounted FastPro design is said to cut service and install time by up to 50%. We saw no independent check.
  • ConsumerAffairs: it blocked our access, so we are not repeating its star rating or reviews. It covers the brand overall, which is mostly window and through-the-wall units.
  • Canadian evidence: none found on HomeStars, forums or Canadian distributor lists. A US forum thread that earlier research cited blocked our access, so we are not relying on it.

Warranty: two documents, two answers

Friedrich's warranty documents say coverage applies to units installed in the continental United States, Alaska, Hawaii, Puerto Rico, Guam, Mexico and Canada, and only while the unit stays at the original site.

Document Parts Compressor Registration
Floating Air limited warranty (2024) 5 years in the text, though the heading says "Seven Year Warranty" 10 years Registered owners get additional-term cover; California, Florida and Quebec residents need not register
Floating Air Pro limited warranty (older revision, hosted by AJ Madison) 5 years 7 years Registration card is not a condition of coverage

Both exclude labour, and the 2024 document says commercial installations get 5 years. The heading versus text mismatch means the registered parts term is unclear. Get the document that ships with your exact unit, register it anyway, and ask your installer for their own labour warranty in writing.

What it costs

Solenery does not set prices. We found no Canadian installed price for Friedrich, and it is not in Furnaceprices.ca's October 9, 2026 brand tables. Generic ductless context from that page, and a US retailer:

Source Scope Range
Furnaceprices.ca (updated Oct 9, 2026) Single-zone ductless, any brand, installed $5,000 to $8,000
Furnaceprices.ca Multi-zone ductless, any brand, installed $8,000 to $16,000+
Boldr (US dollars, 2026) 12,000 BTU single zone, equipment / installed $900 to $1,500 / $2,800 to $4,500
Boldr (US dollars, 2026) 24,000 BTU single zone, equipment / installed $1,400 to $2,200 / $3,800 to $5,500

Boldr's numbers are US prices from a seller of thermostats, and Furnaceprices.ca runs a quote-request service. Neither covers Canadian labour or permits. Get two written quotes naming exact outdoor and indoor models.

Rebates and the cost gap

Eligibility depends on the exact outdoor and indoor combination, not the Floating Air name. Check both model numbers against the federal product-list guidance, and ask whether Select models are on it, since Friedrich says only some are ENERGY STAR certified.

Check your heat-pump rebate eligibility

Explore heat-pump rebates you may qualify for through a property assessment.

Explore heat-pump rebates

Who it suits

Friedrich suits a homeowner or small business that wants a quiet single-room or small-space heat pump and has found a local installer comfortable with the brand. A Pro X single-zone unit is the tier to look at if winters are cold. Whole-home multi-zone in a very cold region is a harder case. Compare Mitsubishi or Fujitsu if you want a brand with a more established Canadian installer base.

Questions to ask your installer

  1. Which tier and exact outdoor and indoor models are quoted, and is a Pro X unit included?
  2. What does the capacity chart show at my design temperature?
  3. Have you installed and serviced Friedrich in winter, and who supplies parts in Canada?
  4. Which warranty document applies, who registers it, and what does your labour warranty cover?

Sources

Share this article