Skip to content
Back to Solar Energy
Solar Energy

How Net Metering Works: Follow Solar Self-Use, Exports and Imports

Learn how net metering works with a day-and-night energy-flow example that separates solar self-use, grid exports, later imports and bill valuation.

Arshia Jahangiri
3 min

Table of contents

How net metering works becomes clearer when Canadian homeowners follow the electricity before calculating credits. Solar can supply household demand as it is generated, surplus can flow to the grid, and the home can import electricity later. The utility agreement determines how those exchanges affect the bill.

Generation, direct use, exports and imports are different quantities. An annual generation total matching annual demand does not mean the house avoids grid imports at every hour.

Follow a simple daytime and night-time example

Every number below is invented for one teaching example with no battery. Measurement and conversion differences are ignored. These are not expected daily results for a particular Canadian home or season.

Period Solar generation Household demand Direct solar use Grid exports Grid imports
Daytime 24 kWh 10 kWh 10 kWh 14 kWh 0 kWh
Night-time 0 kWh 20 kWh 0 kWh 0 kWh 20 kWh
Total 24 kWh 30 kWh 10 kWh 14 kWh 20 kWh

The model assumes the daytime demand is supplied while solar is available. Real intervals can contain both imports and exports as clouds and loads change. A daytime total alone cannot prove that all its demand coincided with generation.

In the example, generation is 10 kWh used directly plus 14 kWh exported. Demand is 10 kWh supplied directly plus 20 kWh imported. These checks explain why a 24 kWh generation report is not a 24 kWh export report.

Apply the account’s valuation afterward

Suppose, solely for illustration, imports cost $0.20/kWh and exports are valued at $0.12/kWh. The 20 kWh imported costs $4.00 and the 14 kWh exported creates $1.68 of assumed value. Their difference is $2.32 before fixed charges, taxes or other adjustments excluded here.

Those invented rates are not a Canadian tariff. A utility using different prices, credit units or settlement rules will produce a different bill. Multiplying the 6 kWh net difference by the import price would not reproduce this example because the two directions have different assumed values.

Keep the credit arrangement specific

BC Hydro’s self-generation page distinguishes its service arrangements and explains measurement and credits. Other utilities have their own terms. Confirm the account’s applicable arrangement and effective date rather than applying another province’s policy.

Ask how exports are valued, which charges credits offset, how unused balances are treated and whether a later equipment or tariff change requires review. An export balance is not automatically refundable cash.

Ask whether shifting a load is practical

Operating a suitable load while solar is available can change direct use and exports. Its financial effect depends on the energy used, the applicable prices and the cost or inconvenience of changing the routine.

Do not run an appliance unnecessarily merely to reduce exports. Preserve safe operating instructions and household needs. Adding a battery or bidirectional vehicle changes the system and requires a separate design and cost assessment; it is not assumed in this flow example.

Request the same breakdown in a proposal

Ask for generation, direct use, imports and exports over stated periods, with the assumptions behind their timing. Request the tariff basis separately and keep any forecast labelled as a forecast.

The utility interconnection guide explains the separate approval process. Permission to connect, a rebate decision and the valuation of exported electricity answer different questions. A useful proposal explains each without turning a generation total into a promise that the whole bill disappears.

Share this article