Skip to content
Back to Heat Pumps
Outdoor heat pump unit beside a Canadian home
Heat Pumps

Napoleon NS18 and NDHAS22 Heat Pump Review

An Ontario company with a four-model heat pump range. What its tech sheet shows at 5 °F, where outside sites claim more, and which warranty page to believe.

Arshia Jahangiri
5 min

Table of contents

Napoleon, the Barrie, Ontario company known for fireplaces and furnaces, sells a small range of variable-speed heat pumps: the NS18 and a Premium series for ducted homes, and NDHAS22 and NDHAS26 ductless units. Its own tech sheet rates the NDHAS22BB for heating to −25 °C, while outside sites claim −30 °C, so ask for the capacity table. We found few owner reviews, and the warranty terms differ by source.

What you are buying

Furnaceprices.ca (updated September 1, 2026) describes four current models, all with variable-speed inverter compressors and ENERGY STAR certification. It lists the ductless NDHAS26 at 28.1 SEER2 and 13.0 HSPF2, the NDHAS22 at 24.0 SEER2 and 10.5 HSPF2, the ducted NS18 at 20.0 SEER and 10.5 HSPF, and the Premium central series at 19.0 SEER2 and 10.0 HSPF2. Both ductless lines work in single-zone and multi-zone setups. Napoleon's own site pages were blocked from automated reading, so we relied on its published tech sheet and on third-party summaries. Get a Better Quote, an Ontario comparison guide, says that of Napoleon and KeepRite, only Napoleon is actually built in Canada; that is one lead-generation source.

Cold-weather numbers that don't match

The Napoleon NDHAS22BB tech sheet (2025) gives a heating operating range from −25 °C (−13 °F), and lists these outputs for its 12,000, 18,000 and 24,000 Btuh sizes:

Size At 17 °F (−8 °C) At 5 °F (−15 °C) COP at 5 °F HSPF2 (Region IV)
12,000 Btuh 9,900 Btuh 8,600 Btuh 2.35 11.5
18,000 Btuh 14,500 Btuh 13,000 Btuh 2.35 11.1
24,000 Btuh 21,300 Btuh 17,800 Btuh 2.15 10.0

That is about 72% of the 12,000 Btuh unit's nominal heat at −15 °C. The sheet also lists SEER2 of 23.1, 24 and 23.5, outdoor sound of 54, 59 and 60 dBA, and NEEP certification. Get a Better Quote says the NS18 and NDHAS26 "rate for full capacity at −30 °C", which conflicts with the −25 °C operating range on the NDHAS22BB sheet and is an unconfirmed claim from a lead-generation site. We could not read Napoleon's NS18 page or its blog, so ask the installer for the capacity table for the exact model at your design temperature and the backup plan if you pair it with a furnace.

What the tech sheet adds

The same NDHAS22BB sheet lists multi-zone compatibility, a Wi-Fi kit included, ENERGY STAR and NEEP certification, a user-friendly remote with auto restart and louver memory, and R-454B refrigerant, which Napoleon says has a much lower global warming potential than R-410A. Cooling is listed to 50 °C (122 °F). The sheet covers one series, so ask for the equivalent sheet for the NS18 or Premium central unit you are quoted, because we could not read those.

Owner and installer evidence

  • Furnaceprices.ca, a site that earns from quote requests, shows six Napoleon heat-pump reviews averaging 4.83, all positive, gathered from customers who requested quotes through the site, at an average reported cost of $9,110. All six mention quiet, efficient, dependable running; the reviewers are in Ontario, Alberta and Saskatchewan. It is a small, self-selected group.
  • Get a Better Quote says Napoleon's dealer roster is "tighter" than KeepRite's, so fewer contractors may know the brand. That is a comparison site, not owner evidence.
  • We could not read a RedFlagDeals thread, a Metro Vancouver installer's service-call blog or Reddit, so we make no claim about defrost, icing or dual-fuel changeover problems.

Warranty: two versions

Napoleon's NDHAS22BB tech sheet advertises "10 year limited warranty parts and compressor" for all three sizes, and does not mention registration. Furnaceprices.ca says every current model has 5 years on parts and the compressor, rising to 10 years when registered within 60 days, with no labour or unit replacement, and Quebec exempt. We could not read Napoleon's warranty page, so we cannot reconcile the two. Treat the 60-day registration as possible, have the installer register on commissioning, and ask for the certificate for your model. Labour is not part of the standard terms either way.

What it costs

Solenery does not set prices. Furnaceprices.ca (updated September 1, 2026) gives these installed ranges:

System Installed range
Ductless (single or multi-zone) about $4,500 to $11,000
Ducted central (NS18 and Premium) about $9,000 to $15,000

Get a Better Quote (April 2026) puts an NS18-class ducted cold-climate install at "comparable" to a KeepRite Ion 23 at about $6,000 to $9,000, a loose lead-generation estimate. The two ranges overlap only at the edges, and neither is a quote. Itemize indoor and outdoor models, ductwork and backup heat.

Rebates and the cost gap

Use the federal product-list guidance to verify the matched equipment. Eligibility depends on the exact outdoor and indoor combination, so ask for both model numbers on the written bid.

Check your heat-pump rebate eligibility

Explore heat-pump rebates you may qualify for through a property assessment.

Explore heat-pump rebates

Who it suits

Napoleon suits Ontario and Prairie buyers who want a Canadian-headquartered brand, have a dealer who knows it, and will check capacity at their own design temperature. It is also a reasonable alternative to KeepRite for a ducted home. If you want a wide owner-review pool or multi-zone variety, compare Mitsubishi or Daikin.

Questions to ask your installer

  1. Which Napoleon series and exact indoor and outdoor model numbers are on the bid?
  2. What is the rated heat at −15 °C and −25 °C for this model, and what backup runs below that?
  3. Is the warranty 10 years automatically or 5 years until I register, and who registers within 60 days?
  4. How many Napoleon systems have you commissioned, and who services them if you are unavailable?

Sources

Share this article