
York HH8 and Affinity Heat Pump Review
A licensed brand now under Bosch that shares platforms with Coleman and Luxaire. What a Quebec...

Enertech says TETCO and Hydron Module heat pumps are now sold as Enertech and GeoComfort. Here is what two sources say about the dates, the warranty and Canadian supply.
TETCO is a geothermal heat pump brand founded in 1977 that Enertech bought and, in April 2025, folded into the Enertech and GeoComfort names. If you own a TETCO unit, keep the nameplate and records, and ask a dealer which current Enertech or GeoComfort model and warranty would apply. We found no Canadian TETCO price, rating or owner review we could verify.
Trade press from August 6, 2009 (Contractor Magazine) says Enertech Manufacturing bought the Thermal Energy Transfer Company (TETCO) brand from Chiller Solutions LLC of Pompton Plains, New Jersey. It says the line was founded in 1977 and was "one of the first residential geothermal brands marketed in the U.S.", and that Enertech planned to build TETCO equipment in Mitchell, South Dakota alongside its GeoComfort and Hydron Module brands. Enertech's own blog post of April 21, 2025 says Hydron Module and TETCO ground-source heat pumps "are now being sold directly under the Enertech and GeoComfort brands". The sources disagree on timing. The 2025 post says Enertech acquired Hydron Module in 2007 and TETCO "in 2008", while the trade article is dated August 2009, so treat the TETCO purchase year as 2008 or 2009. A 2018 forum post on Heating Help, a trade forum, repeats that Enertech also makes TETCO, Hydron Module and GeoComfort, without evidence beyond the poster's statement.
The Enertech post does not give a cross-reference from old TETCO model numbers to current ones, so we cannot say which current model replaces a given TETCO unit. Related page: GeoComfort.
Ward Heating Products lists a TETCO brand page headed "Available in Canada", and says it sells to qualified Canadian contractors only, with free delivery on parts orders over $250 in many areas. The page we read shows a brand header and no product list, so it shows that a Canadian parts distributor carries the name, not that there is an authorized Canadian dealer network. Enertech's warranty page says Enertech and GeoComfort do not sell to homeowners and require a licensed, EPA-certified contractor, and that it doesn't offer warranty on equipment purchased over the internet.
We found no TETCO rated capacity or efficiency to quote: the ENERGY STAR record for TETCO we tried loaded without content. Geothermal performance depends on the loop, entering-water temperature, flow and the indoor distribution, not on outdoor air. When replacing an old unit, ask the installer for the load calculation, a loop assessment (temperatures and flow), pump requirements, and whether the existing loop and flow center can be reused. Confirm that the replacement's cabinet, line connections, electrical supply and airflow fit your existing unit.
We found no readable TETCO owner reports from Canada. The only account is a 2018 forum question from a contractor asking whether others use the brand, which has no usable replies in the text we read. Reliability and service experience in Canada are therefore unverified.
We could not find a TETCO-specific or Canadian warranty. Enertech's warranty page for its current ground-source heat pumps lists, for residential use, a 10-year warranty on all unit components and a 5-year labour allowance credit that is transferable to a new homeowner, and says the labour allowance may not cover the contractor's full charge. Commercial coverage is 1 year on internal components in the standard option. An extended "Option 18" warranty for the original homeowner provides a one-time compressor and air coil replacement after year 10, lasting 18 years, but is not available for WV and Advantage heat pumps. The page does not name TETCO or Canada, so these terms may not apply to a legacy TETCO unit, and a registration deadline is not stated in the text we read. Ask Enertech or the dealer for the document that matches your serial number.
We found no current Canadian TETCO price. FurnacePrices.ca (a lead-generation site, updated October 9, 2026) puts geothermal systems at about $25,000 to $40,000 or more installed, driven by the buried loop. A replacement into an existing loop will cost differently, so ask for an itemized quote that separates the heat pump, flow center, pump, controls and any loop work.
Check whether the replacement equipment and any reused loop meet the program rules for ground-source systems. Use the federal product-list guidance, and ask for the model number on the written bid before you compare options.
Explore heat-pump rebates you may qualify for through a property assessment.
Explore heat-pump rebatesThis page is for owners of an existing TETCO unit deciding whether to repair or replace it. If you are installing new, look at current Enertech or GeoComfort models, which carry the live warranty.

A licensed brand now under Bosch that shares platforms with Coleman and Luxaire. What a Quebec...

A Whisperline heat pump is part of a building loop, so replacing one is a building decision....

A ground-source brand where the buried loop matters as much as the unit. What WaterFurnace...